Biomechanical analysis of operative methods in the treatment of extra-articular fracture of the proximal Tibia

  • Lee S.-M.; 
  • Oh C.-W.; 
  • Oh J.-K.; 
  • Kim J.-W.; 
  • Lee H.-J.; 
  • 외 3명
Citations

SCOPUS

33

초록

Background: To determine relative fixation strengths of a single lateral locking plate, a double construct of a locking plate, and a tibial nail used in treatment of proximal tibial extra-articular fractures. Methods: Three groups of composite tibial synthetic bones consisting of 5 specimens per group were included: lateral plating (LP) using a locking compression plate-proximal lateral tibia (LCP-PLT), double plating (DP) using a LCP-PLT and a locking compression plate-medial proximal tibia, and intramedullary nailing (IN) using an expert tibial nail. To simulate a comminuted fracture model, a gap osteotomy measuring 1 cm was created 8 cm below the knee joint. For each tibia, a minimal preload of 100 N was applied before loading to failure. A vertical load was applied at 25 mm/min until tibial failure. Results: Under axial loading, fixation strength of DP (14,387.3 N; standard deviation [SD], 1,852.1) was 17.5% greater than that of LP (12,249.3 N; SD, 1,371.6), and 60% less than that of IN (22,879.6 N; SD, 1,578.8;/? < 0.001, Kruskal-Wallis test). For ultimate displacement under axial loading, similar results were observed for LP (5.74 mm; SD, 1.01) and DP (4.45 mm; SD, 0.96), with a larger displacement for IN (5.84 mm; SD, 0.99). The median stiffness values were 2,308.7 N/mm (range, 2,147.5 to 2,521.4 N/mm; SD, 165.42) for the LP group, 4,128.2 N/mm (range, 3,028.1 to 4,831.0 N/mm; SD, 832.88) for the DP group, and 5,517.5 N/mm (range, 3,933.1 to 7,078.2 N/mm; SD, 1,296.19) for the IN group. Conclusions: During biomechanical testing of a simulated comminuted proximal tibial fracture model, the DP proved to be stronger than the LP in terms of ultimate strength. IN proved to be the strongest; however, for minimally invasive osteosynthesis, which may be technically difficult to perform using a nail, the performance of the DP construct may lend credence to the additional use of a medial locking plate. © 2014, by The Korean Orthopaedic Association. All rights reserved.

키워드

Biomechanical study; Locking plate; Nail; Proximal tibial fracture; Article; biomechanics; bone nail; comminuted fracture; controlled study; intermethod comparison; intramedullary nailing; locking compression plate; mechanical stimulus test; mechanical stress; minimally invasive surgery; osteosynthesis; plate fixation; proximal tibia extra articular fracture; proximal tibia fracture; rigidity; simulation; strength; tibia osteotomy; audiovisual equipment; biomechanics; bone nail; bone plate; devices; Fractures, Comminuted; human; pathophysiology; Tibial Fractures; Biomechanical Phenomena; Bone Nails; Bone Plates; Fracture Fixation, Internal; Fractures, Comminuted; Humans; Models, Anatomic; Tibial Fractures
제목
Biomechanical analysis of operative methods in the treatment of extra-articular fracture of the proximal Tibia
저자
Lee S.-M.; Oh C.-W.; Oh J.-K.; Kim J.-W.; Lee H.-J.; Chon C.-S.; Lee B.-J.; Kyung H.-S.
DOI
10.4055/cios.2014.6.3.312
발행일
2014
유형
Article
저널명
Clinics in Orthopedic Surgery
권
6
호
3
페이지
312 ~ 317