Enhanced Drilling Accuracy in Mandibular Reconstruction with Fibula Free Flap Using a Novel Drill-Fitting Hole Guide: A 3D Simulation-Based In Vitro Comparison with Conventional Guide Systems

초록

Virtual planning and patient-specific surgical guides have become standard practice to achieve accurate mandibular reconstruction with fibula free flaps. Although these technologies have greatly improved surgical precision, slight deviations may still occur. To further minimize these inaccuracies, we focused on the drilling process and developed a novel drill-fitting hole guide (DFG) system. This in vitro study compared the DFG with two conventional guide designs-a drill-wide hole guide (DWG) and a trocar-fitting hole guide (TFG)-using 3D-printed resin models. Twenty oral and maxillofacial surgeons performed guided drilling with all three guide types, and drilling accuracy and subsequent plate positioning were evaluated using a fully digitized workflow in 3-matic software. Deviations in drill entry points and trajectories were quantified, along with plate overlap ratios (Dice coefficients) and plate angular discrepancies. The DFG achieved the highest accuracy, showing the smallest drilling point deviation (0.17 +/- 0.08 mm) and angular deviation (2.41 +/- 1.24 degrees), the greatest plate overlap (0.90 +/- 0.04), and the lowest plate angular misalignment (0.87 +/- 0.59 degrees). Although all guide types yielded clinically acceptable results, the DFG demonstrated significantly higher accuracy. These findings suggest that the drill-guide interface is a key factor in surgical precision that has received limited attention.

키워드