Radial head prosthesis micromotion characteristics: Partial versus fully grit-blasted stems

초록

Background: Compared to fully textured prosthetic stems, partial texturing lessens bone loss due to stress shielding and makes removal easier. However, initial press-fit stability is necessary for bone ingrowth. Hypothesis: There is no significant difference in the initial stability of radial head prostheses that are partially grit-blasted compared to those that are fully grit-blasted. Materials and methods: Cadaveric radii were implanted with partial or fully grit-blasted radial head prostheses. Micromotion of the stem at the isthmus of the canal and stem tip were measured under circumstances simulating eccentric loads. Results: Micromotion was not significantly different in the fully grit-blasted stems (isthmus, 11 ± 1 μm; tip, 21 ± 2 μm) and partially grit-blasted stems (isthmus, 13 ± 2 μm; tip, 25 ± 2 μm) (P = 0.4). The direction of loading had no effect on micromotion characteristics in either the fully or partially grit-blasted stems (P = .07). Discussion: Micromotion is comparable in partially and fully grit-blasted radial head prosthetic stems. For both stem surfaces, micromotion was well within the range that is conducive for bone ingrowth. A partially textured stem might have less bone loss due to stress shielding, making it easier to remove without destroying bone. Conclusion: The initial stability of a radial head stem that is partially grit-blasted only at the proximal end is comparable to that of a radial head stem that is grit-blasted along its entire length. © 2011 Journal of Shoulder and Elbow Surgery Board of Trustees.

키워드